craft

All posts tagged craft

Fabric unpaper towel roll

Published January 30, 2015 by Fi-B

I decided to make some cloth towels to use instead of using paper towels all the time. And this is how they look on my paper towel holder.

2015/01/img_0839.jpg

This is the tutorial I followed to make them:
http://craftygemini.com/2013/01/fabric-paper-towel-roll-diy-tutorial.html

I bought two fabrics from my local lincraft store. And some microfibre terry towelling from http://www.gbau.com.au as this is a good cleaning and absorbent fabric.

I took my current paper towel size as a base so I knew it would fit on my current holder. It wasn’t square but rectangle so I had to keep that in mind when adding the snaps to join together. I made 10 so cut that many of each fabric. I then pinned together and sewed around leaving enough gap to turn inside out

2015/01/img_0826.jpg

I then turned out and top stitched around the edges and enclose the open section. I also sewed diagonally from each corner to the opposite to help the towel keep it’s size when washing.

I then added snaps using my snap machine and snap press from http://www.snapsautralia.com and rolled them around each other.
Things to keep in mind:
Make sure snaps are done on correct sides as it’s a rectangle and right way around so they match up and sit under each other nicely.

2015/01/img_0836.jpg

Now they look so good not sure if I want to use them

2015/01/img_0837.jpg

Advertisements

Sewing/embroidery travel case

Published January 22, 2015 by Fi-B

This week I started on a new project for myself. As I travel on the train to and from work I like to do some of my craft sewing embroidery stuff on there. But as I’m working on something my scissors are sliding all over the place and I keep losing threads etc. I decided it was time to make something for holding those necessary items so I made this.

2015/01/img_0795.jpg
I started by getting two pieces of red felt, one for the inside and one for the outside. I ironed on some interfacing to both pieces. I embroidered my design on the front of the outside one.

I then made some pockets and connected to the inside piece. Most of them I made two pieces of felt for extra strength. The middle yellow pocket for the scissors I also ironed on interfacing to make it a bit tougher.

2015/01/img_0797.jpg

The section on the left I made a flap to put my needles and pins in, but it lifts up and there is another pocket underneath.

2015/01/img_0800.jpg
I added a snap with a snap machine and made a double felt piece to use to keep the scissors in place.

2015/01/img_0799.jpg

I sewed some elastic onto the inner edges of one of the main red pieces and a button onto the back of the outside felt piece

2015/01/img_0796.jpg